You may also want to.
tangles around the brush roll.Or blockages at the inlet leading into the vacuum cleaner?
You may need to remove the baseplate to get a good look..Remove the dust canister and empty it, then check whether there is a blockage at the entrance or exit tubes..Remove the hose and check both ends for a blockage.. You can reduce the chances of a blocked vacuum by regularly cleaning your vacuum, avoiding overfilling the dust canister, and making sure you don’t suck up large objects.. Related Article:.
How to Clean Your Vacuum Cleaner.Running the Vacuum for Too Long.
In some cases, a Vax may overheat simply because it’s been used for an extended period of time..
usually shouldn’t happen if the vacuum is functioning correctly, but may be the cause if you’ve been vacuuming for a long time without letting it cool down.. Switch off the vacuum and allow it to cool for 24 hours, then try using it again.Every vacuum is different, but the process below is a general guide to cleaning your vac.
Make sure you check the vacuum’s manual for model-specific cleaning tips though.. Set aside.around 30 minutes.
to complete the cleaning process.You’ll also need to let your vacuum parts air dry for at least 24 hours before using it, so don’t clean it on a day you want to vacuum your home.. Tools You’ll Need.